 |
Graphite Sheet Gasket |
TG 870 is graphite sheet flat gaskets that is cut from all kinds of pure graphite and reinforced graphite sheets.TG Metal eyeleted gasket make better than pure cut gaskets, it remains properties of cut gaskets,the matal eyelet can offer special protection against blowout and chemical attack,also improve seal-ability due to the local higher stress under eyelet.the metal eyelet material is normally SS304(L) or 316(L),pressure6.4-10Mpa.
| Reinforced Graphite Sheet |
Stability unde compressive stress(N/MM2L©
|
Temperature ?c | Compressibility | Recovery | |
| In oxidizing media | In non oxidizing media | ||||
| RGS TCS | ?Ý 48 | -10-450 | -10-550 | 30-35 | 15-20 |
| RGS TSS | ?Ý 48 | -240-450 | -200-600 | 30-35 | 15-30 |
| RGS ASS | ?Ý 48 | -240-450 | -200-600 | 30-40 | 10-15 |
| RGS MSS | ?Ý 48 | -240-450 | -200-600 | 40-50 | 15-20 |
(RGS is the brand of TG Graphite Products)
Metal Eyelet Flat Gaskets Styles
 |
870 | graphite sheet cut gasket without eyelet |
|
871
|
graphite sheet cut gasket with Inner eyelet | |
|
872
|
graphite sheet cut gasket with Outer eyelet eyelet
|
|
|
873
|
graphite sheet cut gasket with Inner & Ourter eyelet
|